--001a1143ce4827889f055551a2d9
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: quoted-printable
As requested:
# $Id: tbd.conf.sample,v 1.8 2008/02/26 18:20:54 wb6ymh Exp $
;Lines beginning with ';' or '#' are comments, if you decide to set any of
the
;optional settings be sure to delete the leading ';' character before the ;configuration variable.
ConferenceCall =3D K7LWH-R
ConferencePass =3D ****
ConferenceQth =3D Kirkland, WA USA
EmailAdr =3D
k7lwh@lakewashingtonhamclub.org
ConferenceID =3D k7lwh-r
Banner =3D Welcome to K7LWH-R EchoIRLP
Banner =3D 145.490 103.5
Banner =3D Kirkland, WA USA
; ConferenceCall - Callsign or name of Conference server. Required.
; The callsign MUST be entered in UPPERCASE. The callsign must be either
; a link "-L", repeater "-R" or conference name "*{name}*", the EchoLink
; directory server will no longer accept a login from thebridge using just
; a "bare" callsign.
; If you plan to run an EchoLink conference regularly using theBridge,
; please use a conference-server callsign instead of your own call.
; See www.echolink.org/el/conf.htm for more info.
; ConferencePass - EchoLink password. Required.
; ConferenceQth - location or info string displayed on station list.
Required.
; Email Address - Your email address. This email address is sent to the
; EchoLink directory server and is only visible to the EchoLink support
; group. An email address is required so that EchoLink Support can
; contact you about validation. Required.
; Conference ID - Text shown at the top of the station list
; Banner - shown at the bottom of station list.
; Note: The banner is pushed off the bottom of the station list if needed
; to make room for users callsigns. The ConferenceID is always displayed.
; Use the screen the way you like, but I'd recommend that the ConferenceID
; be kept to one line and any other things you would like to display be
; put in the banner area. Comment out the following lines if you don't wan=
t
; a banner. Note unlike most variables there can be more than one Banner
; variable in the configuration file, each one simply adds another line.
; Working directory. This is where thebridge creates its files. Required.
; Make sure that the specified directory exists and that the user account
; used to run TBD has read and write privileges in it.
WorkingDir =3D /home/EchoIRLP/tbd/data
###########################################################################= ####
;None of the following are required, they may be used if desired to
;override the default settings.
; If you do not wish thebridge users to be able to write to the disk set
; this variable to zero.
;EnableDiskCommands =3D 0
; Administrator password. Please do not use a "valuable" password here,
; it is sent in clear text via UDP to the RTP port. i.e. it can be sniffed=
.
; You have been warned.
;AdminPass =3D secret
; Sysop password. The sysop password is a lower level password that is
; typically used by net control stations. It provides to some, but not all=
,
; of the commands available to Administrators. Please do not use a
"valuable"
; password here, as with the administrator password it is sent in clear
text
; via UDP to the RTP port. i.e. it can be sniffed.
; You have been warned again.
;SysopPass =3D anothersecret
; User ID for thebridge to run under. (Ignored for Windows)
; If thebridge is started by the system startup scripts it will probably
; be running as the superuser. This is not necessary and is very
undesirable
; from a system security standpoint. If RunAsUser is set thebridge will
; change its userid to that user after opening the syslog. If this is not
; set thebridge will attempt to change userid to the user "tbd".
;
RunAsUser =3D repeater
; These variables should be set to the same values as you use with your
; EchoLink client. The first server should be the one that's closest to
you.
; Hostname of primary directory server
DirServerHost =3D server1.echolink.org
; Hostname of directory backup server #1
DirServerHost1 =3D server2.echolink.org
; Hostname of directory backup server #2
DirServerHost2 =3D server3.echolink.org
; Hostname of directory backup server #3
DirServerHost3 =3D server4.echolink.org
; Maximum amount of time in milliseconds between RTP audio packets before
; assuming that a conference member has stopped talking.
;ConfAudioTimeout =3D 800
; Maximum amount of time in seconds between RTCP control packets before
; assuming that a conference member has left the conference.
;ConfMemberTimeout =3D 40
; Number of seconds between logins (status updates) to the directory server
; Set to zero to disable logins
; For use with EchoLink, do not use any value other than 360
;LoginInterval =3D 360
; Number of seconds between station list refreshes
; Set to zero to disable station refreshes
; For use with EchoLink, do not use any value less than 310 ;StationListInterval =3D 600
; Maximum number of simultaneous conference clients. Each client requires
; approximately 17.5k bps of upstream bandwidth, the default of 8 users is
; about right for a cable modem or dsl line. Set this to no more than
; n =3D (Upstream BW/17500) + 1;
; or for a T1 line (1.54 mb)
; n =3D (1540000 / 17500) + 1 =3D 89
MaxConferenceClients =3D 2
; Set this to append "<SB>" to conference ID when no one is talking.
; (Like the iLink conference server)
SB_Enable =3D 1
; Set this to append "[number of users]" to the conference ID line. UserCountEnable =3D 0
; Set this to include the maximum number of users in user display after
; conference ID. (Requires UserCountEnable to also be set)
; Appends "[number of users/Maximum users]" after conference ID line. MaxCountEnable =3D 0
; Set this to append the user count(s) after the location string in the
; directory server listing. UserCountEnable and MaxCountEnable above
; control the format.
UserCountInLocation =3D 0
; Set this to the minimum number of milliseconds that stations must wait
; between transmissions. Any transmissions made during this mandatory
pause
; interval will be muted. This parameter may help prevent repeater
"bouncing"
; that occurs when multiple repeaters or link stations are logged into a
; conference room with poor operating parameters.
;
; It will also ensure that there's a break between transmissions to allow
; simplex links to leave the conference
; This variable may also be set using the pausetime command.
;PauseTime =3D 1750
; Set this to the minimum number of milliseconds that -L and -R stations
; must transmit before being recognized. This parameter may help prevent
; repeater "bouncing" that occurs when multiple repeaters or link stations
; are logged into a conference room with poor operating parameters.
; This variable may also be set using the belchfilter command.
;BelchTime =3D 2000
; Set this if you are thebridge with AAC Management LTD's IL-PRO directory
; server. DO NOT SET this if you are running on the standard EchoLink
; directory server. Make sure you also set DirServerHost to the IP address
; or host name of your directory server.
;iLinkDirServer =3D 1
; Age of DNS cache in seconds before it is updated.
;DnsUpdateInterval =3D 900
; Set variable to create a private conference. A private conference will
; be listed in the directory server as "Private conference" and will accept
; connections only from stations which have been added to the access contro=
l
; list.
;PrivateConference =3D 1
; This variable specifies how many seconds a user's record remains in
memory
; after he has logged out of the EchoLink system.
;InactiveDirTimeout =3D 51000
; This variable controls how often the log file is rolled over.
; 0 - logging disabled. (The Unix version will use syslog for logging)
; 1 - Never: single logfile, filename =3D tbd.log
; 2 - Never: new logfile opened everyday, filename =3D tbdmmddyy.log
; 3 - Daily: new logfile opened everyday, filename =3D tbd.log, tbd.bak
; 4 - Weekly: new logfile opened everyday, filename =3D mon.log, tues.log, = ...
;
;LogFileRolloverType =3D 1
; This variable controls the logging detail:
; 0 - log everything
; 1 - log warnings and errors only
; 2 - log errors only
;
; (not implemented currently, everything is logged)
;LogLevel =3D 0
###########################################################################= ####
; The following variables control file playback
;
; These variables control the pauses between transmission when playing
; back recordings. Times are specified in seconds.
;
; The original pauses between transmission are unmodified when
MaxPlayBackPause
; is set to a large value and MaxPlayBackPause is set to zero.
;
; The purpose of these variables are to allow pauses to either be compresse=
d
; or expanded for playback purposes. For example setting MinPlayBackPause
to
; 5000 (5 seconds) will expand pauses between transmission to 5 seconds to
; provide breaks to allow half duplex repeater links to be dropped during
; playback.
;
; On the other hand setting a MaxPlayBackPause allows long pauses to be
; shortened.
;
MaxPlayBackPause =3D 5
MinPlayBackPause =3D 3
; This variable sets a maximum uninterrupted transmission length for file
; playback. If a recording exceeds this limit a pause of MinPlayBackPause
; seconds is inserted and then the playback resumes. Time is specified in
; seconds.
MaxPlayWithoutPause =3D 300
; This variable specifies a welcome file to be played to users when they
; connect to thebridge. The specified file MUST be in thebridge's internal
; format. You can create a suitable welcome file by using thebridge's
; .record command or by using the tbdcnv utility (available separately).
;
;WelcomeFile =3D welcome.tbd
; This variable specifies the number of seconds to wait after the user
; connects before the welcome message is played. This provides time
; for any voice announcements from the EchoLink client to complete.
; NOTE: Any activity on the conference before the welcome file starts
playing
; will cancel the welcome message. This prevents the welcome message from
; playing in the middle of a live conversation.
;
;WelcomeDelay =3D 0
; This variable specifies the number of seconds to wait after the conferenc=
e
; becomes free before bulletins queued with the .play4 command and using
the
; -i flag command are played.
;IdleTimeout =3D 0 ###########################################################################= ####
; If this variable is nonzero thebridge will save the information file
; (brag sheet) for connecting stations in files named "<callsign>.info".
;
;SaveInfoFiles =3D 0
; If this variable is nonzero the users information file (brag sheet)
; will be displayed instead of the usual station list the first time the
; user transmits.
;
ShowStationInfo =3D 1
; Set this variable to the IP address you wish thebridge to bind to.
; If this variable is not set then thebridge will listen to all available
; interfaces, this is normally what you want.
;Bind2IP =3D 1.2.3.4
###########################################################################= ####
; The following variables maybe be used to enable connectivity to
non-Echolink
; clients such as Speak Freely. Since IRLP is based on Speak Freely this
; allows suitably configured IRLP nodes to connect to the conference.
; Set this variable to allow connections from Speak Freely or RTP clients. SF_Enable =3D 1
; Set this variable to a password that to be used by Speak Freely or
; RTP clients to gain access to the conference.
RTP_Pass =3D password
; Set this variable to specify a non-standard input port for RTP and
; Speak Freely and RTP clients. This may be useful to allow multiple RTP
; applications to be run on a single host. Note: the RTP spec requires
this
; to be an even port, the associated control port will be the next (odd)
port.
SF_Port =3D 2174
; Set this variable to specify a non-standard port for RTP responses for
; Speak Freely and RTP clients.
SF_ReplyPort =3D 2074
; Set this variable to the value to be sent as the user's full name.
; If the variable is not sent then ConferenceCall will be sent instead. ;FullName =3D John Q Ham
; Set this variable to the IP address you wish thebridge to bind to for
; Speak Freely conferences. If this variable is not set then thebridge will
; listen to all available interfaces, this is normally what you want. ;SFBind2IP =3D 5.6.7.8
; Set this variable to enable the Speak Freely and RTP conferences to
support
; clients running the ADPCM codec. NB: This does *NOT* mean that GSM and
; ADPCM clients will be able to communicate by connecting to a common
; conference. GSM packets are only relayed to GSM clients and ADPCM
packets
; are only relayed to ADPCM clients.
;AllowADPCM =3D 1
###########################################################################= ####
; Set this variable to the number of seconds after last activity before
; stations are automatically put into the lurk mode.
;AutoLurkTimeout =3D 900
; Set this variable to automatically put stations into the lurk mode after
; AutoLurkTimeout seconds of inactivity. By default stations are only put
; into the lurk mode after a timeout if the station specifically requested
; that mode by entering ".lurk".
; Bit map: 1 - Autolurk -R stations
; 2 - Autolurk -L stations
; 4 - Autolurk "Normal stations"
; 8 - Autolurk other conferences
; i.e. Set DefaultAutoLurk to the sum of options you wish to enable,
; for example: 0 =3D autolurk disabled, 3 =3D autolurk just -L and -R,
; 15 =3D autolurk everyone.
DefaultAutoLurk =3D 0
; Set this variable to the maximum allowable transmission time. A value
; of zero disables the timeout.
BlabOffTimer =3D 0
; Set this variable to an alternate application name to be used for logging
; purposes. This is useful when running multiple copies of thebridge on a
; single host. (*nix only)
;AppName =3D tbd1
; Set this variable to an alternate directory to use for PID files. This
; might be useful when running thebridge without root privileges. (*nix
only)
;RunDir =3D /var/run
; The following variable is used to execute commands on thebridge startup.
; This may be useful to set initial conditions. For example if you always
; want your conference room linked to your club's repeater you might
; issue a connect command to bring the link up. Unlike most variables
; there can be more than one StartupCmd variable in the configuration file,
; each one simply executes another command.
;
; NOTE: Startup commands are executed approximately 1 minute after the
first
; successful login to a directory server. This delay is necessary to ensur=
e
; that the conference's IP address has had time to propagate to all of
; the EchoLink directory servers before connect commands are issued.
; For security EchoLink nodes refuse connections from other nodes unless
they
; are listed in the directory server.
;StartupCmd =3D connect W1AW-R
###########################################################################= ####
; The following variables maybe be used to enable 3rd party or user written
; programs to interface with thebridge. See SCRIPTING.txt for more details=
.
; Set this variable to enable local scripting using the tbdcmd utility.
CmdPort =3D 5198
; Set this variable to enable local chating the tbdchat utility.
ChatPort =3D 5199
; Set this variable to point to a script/program to execute when
"interesting"
; events occur.
EventScript =3D /home/EchoIRLP/scripts/echoirlp-status
; Set this variable to point custom help file that will be displayed when
the
; user enters the '.help' command. This may be used to document custom
; commands. Please be sure to include help for the built in commands as
well.
;HelpFile =3D /home/tbd/mycustomhelp
; Set this variable to create a *nix style host file of EchoLink users.
; The EchoLink node number is added after the IP address as a comment. WriteHostFile =3D 1
; Set this variable to included all hosts thebridge knows about in the host=
s
; file. Normally only hosts that are currently logged in on the Echolink
; directory server are included. Use this feature carefully, the IP addres=
s
; of hosts that are not currently logged in may be inaccurate especially
; for users with dialup connections. Hosts which are not logged in are
; marked with "(off line)" after the EchoLink node number in the comment
field.
;IncludeAllHosts =3D 1
; Set this variable to include the node's QTH in the hosts file.
; NB: As of 6/29/2007 including QTH information in the hosts file breaks
; the EchoIRLP scripts.
;QthInHostsFile =3D 1
; The Qth information (or information set by the Info command) can
; be replace with "In Conference <call>" or "Connected to <call>" when
; the node is connected. Set the following variable to zero to enable
; that feature.
; 0 =3D never override ConferenceQth or .info command settings.
; 1 =3D show connection state for conferences only.
; 2 =3D show connection state for conferences and stations.
;ShowStatusInInfo =3D 0
###########################################################################= ####
; This variable specifies the maximum number of duplicate text messages
; that may be received from a station before that station is automatically
; disconnected. Duplicate text messages can be generated when a number
; of conferences are connected together such that they form a closed loop.
; There is code in thebridge which attempts to suppress this "feedback"
; but the detection logic is less than perfect. Some versions of thebridge
; are known to be unable to suppress loops of certain topologys. The
; automatic disconnect logic is intended as a safety measure to ensure that
; all available bandwidth is not consumed by a text message feedback loop.
; Although not recommended the automatic disconnection logic can be
; disabled by setting this variable to zero.
;MaxDups =3D 100
###########################################################################= ####
; The following variables should only be set for an RF-connected nodes
; (thelinkbox and EchoIRLP nodes), as they make little or no sense for a
; conference room located in "Cyberspace". If this information is supplied
; it will be sent to the central EchoLink directory server so your node
; will be listed on the
http://www.echolink.org/links.asp page.
; Set this varable to send node information to the EchoLink directory serve=
r
;AvrsEnable =3D 1
; Node location
;Lattiude in degrees, negative values for the southern hemisphere
;Latitude =3D 33.743386
;Longitude in degrees, negative values west of the prime meridian
;Longitude =3D -118.366453
; Transmitter power in watts
;TxPower =3D 10
; Antenna height above average terrain in feet
;Haat =3D 100
; Antenna gain in DB
;AntGain =3D 3
; Heading of the main antenna lobe in degrees.
; If antenna is an omni enter 0.0, if the antenna is directional and
pointed
; due north enter 360.0.
;AntDir =3D 0.0
; Transmitter frequency in Mhz
;Frequency =3D 145.49
; Continous tone coded squelch system system frequency required to open
; receiver's squelch. In Hertz. Leave unset for carrier squelch system
;CTCSS =3D 100.0
On Thu, Jul 27, 2017 at 3:05 AM, Tony Langdon
vk3jed@vkradio.com [EchoIRLP] <
EchoIRLP@yahoogroups.com> wrote:
On 27/07/2017 2:55 PM, Don Sayler don.sayler@gmail.com [EchoIRLP] wrote:
Our node is located at a remote site, so I can't do a lot of testing at
the moment. But, I do have an internet connection, and can log in and loo=
k
at stuff.
ConferenceCall =3D K7LWH-R
ConferenceID =3D k7lwh-r
MaxConferenceClients =3D 2
Looks OK so far. :) Might pay to post the whole tbd.conf (minus any passwords). :)
--
73 de Tony VK3JED/VK3IRLhttp://vkradio.com
=20
--001a1143ce4827889f055551a2d9
Content-Type: text/html; charset=UTF-8
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "
http://www.w3.org/TR/htm= l4/strict.dtd">
<html>
<head>
</head>
=20
<body style=3D"background-color: #fff;">
<span style=3D"display:none"> </span>
<!--~-|**|PrettyHtmlStartT|**|-~-->
<div id=3D"ygrp-mlmsg" style=3D"position:relative;">
<div id=3D"ygrp-msg" style=3D"z-index: 1;">
<!--~-|**|PrettyHtmlEndT|**|-~-->
<div id=3D"ygrp-text" >
=20=20=20=20=20=20
=20=20=20=20=20=20
<p><div dir=3D"ltr"><div class=3D"gmail_default"><font size=3D"4">As = requested:</font></div><div class=3D"gmail_default"><br></div><div class=3D= "gmail_default"><div class=3D"gmail_default"># $Id: tbd.conf.sample,v 1.8 2= 008/02/26 18:20:54 wb6ymh Exp $</div><div class=3D"gmail_default"><br></div= ><div class=3D"gmail_default">;Lines beginning with ';' or '#&#= 39; are comments, if you decide to set any of the</div><div class=3D"gmail_= default">;optional settings be sure to delete the leading ';' chara= cter before the=C2=A0</div><div class=3D"gmail_default">;configuration vari= able.</div><div class=3D"gmail_default"><br></div><div class=3D"gmail_defau= lt">ConferenceCall =3D K7LWH-R</div><div class=3D"gmail_default">Conference= Pass =3D ****</div><div class=3D"gmail_default">ConferenceQth =3D Kirkland,=
WA USA</div><div class=3D"gmail_default">EmailAdr =3D <a href=3D"mailto:k7=
lwh@lakewashingtonhamclub.org">
k7lwh@lakewashingtonhamclub.org</a></div><di=
v class=3D"gmail_default">ConferenceID =3D k7lwh-r</div><div class=3D"gmail= _default"><br></div><div class=3D"gmail_default">Banner =3D Welcome to K7LW= H-R EchoIRLP</div><div class=3D"gmail_default">Banner =3D 145.490 103.5</di= v><div class=3D"gmail_default">Banner =3D Kirkland, WA USA</div><div class= =3D"gmail_default"><br></div><div class=3D"gmail_default">; ConferenceCall =
- Callsign or name of Conference server.=C2=A0 Required.</div><div class=3D= "gmail_default">; The callsign MUST be entered in UPPERCASE.=C2=A0 The call= sign must be either</div><div class=3D"gmail_default">; a link "-L&quo= t;, repeater "-R" or conference name "*{name}*", the Ec= hoLink</div><div class=3D"gmail_default">; directory server will no longer = accept a login from thebridge using just</div><div class=3D"gmail_default">=
; a "bare" callsign.</div><div class=3D"gmail_default">; If you p= lan to run an EchoLink conference regularly using theBridge,</div><div clas= s=3D"gmail_default">; please use a conference-server callsign instead of yo=
ur own call. =C2=A0</div><div class=3D"gmail_default">; See <a href=3D"http= ://www.echolink.org/el/conf.htm">www.echolink.org/el/conf.htm</a> for more = info.</div><div class=3D"gmail_default"><br></div><div class=3D"gmail_defau= lt">; ConferencePass - EchoLink password. Required.</div><div class=3D"gmai= l_default"><br></div><div class=3D"gmail_default">; ConferenceQth - locatio=
n or info string displayed on station list. Required.</div><div class=3D"gm= ail_default"><br></div><div class=3D"gmail_default">; Email Address - Your = email address.=C2=A0 This email address is sent to the=C2=A0</div><div clas= s=3D"gmail_default">; EchoLink directory server and is only visible to the = EchoLink support=C2=A0</div><div class=3D"gmail_default">; group. An email = address is required so that EchoLink Support can=C2=A0</div><div class=3D"g= mail_default">; contact you about validation. Required.</div><div class=3D"= gmail_default"><br></div><div class=3D"gmail_default">; Conference ID - Tex=
t shown at the top of the station list</div><div class=3D"gmail_default"><b= r></div><div class=3D"gmail_default">; Banner - shown at the bottom of stat= ion list.</div><div class=3D"gmail_default">; Note: The banner is pushed of=
f the bottom of the station list if needed</div><div class=3D"gmail_default= ">; to make room for users callsigns.=C2=A0 The ConferenceID is always disp= layed.</div><div class=3D"gmail_default">; Use the screen the way you like,=
but I'd recommend that the ConferenceID</div><div class=3D"gmail_defau= lt">; be kept to one line and any other things you would like to display be= </div><div class=3D"gmail_default">; put in the banner area.=C2=A0 Comment = out the following lines if you don't want</div><div class=3D"gmail_defa= ult">; a banner.=C2=A0 Note unlike most variables there can be more than on=
e Banner</div><div class=3D"gmail_default">; variable in the configuration = file, each one simply adds another line.</div><div class=3D"gmail_default">= <br></div><div class=3D"gmail_default">; Working directory.=C2=A0 This is w= here thebridge creates its files. Required.</div><div class=3D"gmail_defaul= t">; Make sure that the specified directory exists and that the user accoun= t</div><div class=3D"gmail_default">; used to run TBD has read and write pr= ivileges in it.</div><div class=3D"gmail_default">WorkingDir =3D /home/Echo= IRLP/tbd/data</div><div class=3D"gmail_default"><br></div><div class=3D"gma= il_default">###############################################################= ################</div><div class=3D"gmail_default">;None of the following a=
re required, they may be used if desired to=C2=A0</div><div class=3D"gmail_= default">;override the default settings.</div><div class=3D"gmail_default">= <br></div><div class=3D"gmail_default">; If you do not wish thebridge users=
to be able to write to the disk set</div><div class=3D"gmail_default">; th=
is variable to zero.</div><div class=3D"gmail_default">;EnableDiskCommands = =3D 0</div><div class=3D"gmail_default"><br></div><div class=3D"gmail_defau= lt">; Administrator password.=C2=A0 Please do not use a "valuable"=
; password here,</div><div class=3D"gmail_default">; it is sent in clear te=
xt via UDP to the RTP port. =C2=A0i.e. it can be sniffed.</div><div class= =3D"gmail_default">; You have been warned.</div><div class=3D"gmail_default= ">;AdminPass =3D secret</div><div class=3D"gmail_default"><br></div><div cl= ass=3D"gmail_default">; Sysop password.=C2=A0 The sysop password is a lower=
level password that is=C2=A0</div><div class=3D"gmail_default">; typically=
used by net control stations.=C2=A0 It provides to some, but not all,</div= ><div class=3D"gmail_default">; of the commands available to Administrators=
. Please do not use a "valuable"=C2=A0</div><div class=3D"gmail_d= efault">; password here, as with the administrator password it is sent in c= lear text=C2=A0</div><div class=3D"gmail_default">; via UDP to the RTP port=
. =C2=A0i.e. it can be sniffed.</div><div class=3D"gmail_default">; You hav=
e been warned again.=C2=A0</div><div class=3D"gmail_default">;SysopPass =3D=
anothersecret</div><div class=3D"gmail_default"><br></div><div class=3D"gm= ail_default">; User ID for thebridge to run under. =C2=A0(Ignored for Windo= ws)</div><div class=3D"gmail_default">; If thebridge is started by the syst=
em startup scripts it will probably</div><div class=3D"gmail_default">; be = running as the superuser.=C2=A0 This is not necessary and is very undesirab= le</div><div class=3D"gmail_default">; from a system security standpoint.= =C2=A0 If RunAsUser is set thebridge will=C2=A0</div><div class=3D"gmail_de= fault">; change its userid to that user after opening the syslog. If this i=
s not=C2=A0</div><div class=3D"gmail_default">; set thebridge will attempt =
to change userid to the user "tbd".</div><div class=3D"gmail_defa= ult">;=C2=A0</div><div class=3D"gmail_default">RunAsUser =3D repeater</div>= <div class=3D"gmail_default"><br></div><div class=3D"gmail_default">; These=
variables should be set to the same values as you use with your</div><div = class=3D"gmail_default">; EchoLink client.=C2=A0 The first server should be=
the one that's closest to you. =C2=A0</div><div class=3D"gmail_default= "><br></div><div class=3D"gmail_default">; Hostname of primary directory se= rver</div><div class=3D"gmail_default">DirServerHost =3D <a href=3D"
http://= server1.echolink.org">server1.echolink.org</a></div><div class=3D"gmail_def= ault"><br></div><div class=3D"gmail_default">; Hostname of directory backup=
server #1</div><div class=3D"gmail_default">DirServerHost1 =3D <a href=3D"=
http://server2.echolink.org">server2.echolink.org</a></div><div class=3D"gm= ail_default"><br></div><div class=3D"gmail_default">; Hostname of directory=
backup server #2</div><div class=3D"gmail_default">DirServerHost2 =3D <a h= ref=3D"
http://server3.echolink.org">server3.echolink.org</a></div><div clas= s=3D"gmail_default"><br></div><div class=3D"gmail_default">; Hostname of di= rectory backup server #3</div><div class=3D"gmail_default">DirServerHost3 =
=3D <a href=3D"
http://server4.echolink.org">server4.echolink.org</a></div><= div class=3D"gmail_default"><br></div><div class=3D"gmail_default">; Maximu=
m amount of time in milliseconds between RTP audio packets before=C2=A0</di= v><div class=3D"gmail_default">; assuming that a conference member has stop= ped talking.</div><div class=3D"gmail_default">;ConfAudioTimeout =3D 800</d= iv><div class=3D"gmail_default"><br></div><div class=3D"gmail_default">; Ma= ximum amount of time in seconds between RTCP control packets before=C2=A0</= div><div class=3D"gmail_default">; assuming that a conference member has le=
ft the conference.</div><div class=3D"gmail_default">;ConfMemberTimeout =3D=
40</div><div class=3D"gmail_default"><br></div><div class=3D"gmail_default= ">; Number of seconds between logins (status updates) to the directory serv= er</div><div class=3D"gmail_default">; Set to zero to disable logins</div><= div class=3D"gmail_default">; For use with EchoLink, do not use any value o= ther than 360</div><div class=3D"gmail_default">;LoginInterval =3D 360</div= ><div class=3D"gmail_default"><br></div><div class=3D"gmail_default">; Numb=
er of seconds between station list refreshes</div><div class=3D"gmail_defau= lt">; Set to zero to disable station refreshes</div><div class=3D"gmail_def= ault">; For use with EchoLink, do not use any value less than 310</div><div=
class=3D"gmail_default">;StationListInterval =3D 600</div><div class=3D"gm= ail_default"><br></div><div class=3D"gmail_default">; Maximum number of sim= ultaneous conference clients.=C2=A0 Each client requires</div><div class=3D= "gmail_default">; approximately 17.5k bps of upstream bandwidth, the defaul=
t of 8 users is=C2=A0</div><div class=3D"gmail_default">; about right for a=
cable modem or dsl line.=C2=A0 Set this to no more than</div><div class=3D= "gmail_default">; n =3D (Upstream BW/17500) + 1;</div><div class=3D"gmail_d= efault">; or for a T1 line (1.54 mb)</div><div class=3D"gmail_default">; n = =3D (1540000 / 17500) + 1 =3D 89</div><div class=3D"gmail_default">MaxConfe= renceClients =3D 2</div><div class=3D"gmail_default"><br></div><div class= =3D"gmail_default">; Set this to append "<SB>" to conferenc=
e ID when no one is talking.</div><div class=3D"gmail_default">; (Like the = iLink conference server)</div><div class=3D"gmail_default">SB_Enable =3D 1<= /div><div class=3D"gmail_default"><br></div><div class=3D"gmail_default">; = Set this to append "[number of users]" to the conference ID line.= </div><div class=3D"gmail_default">UserCountEnable =3D 0</div><div class=3D= "gmail_default"><br></div><div class=3D"gmail_default">; Set this to includ=
e the maximum number of users in user display after</div><div class=3D"gmai= l_default">; conference ID. =C2=A0(Requires UserCountEnable to also be set)= </div><div class=3D"gmail_default">; Appends "[number of users/Maximum=
users]" after conference ID line.</div><div class=3D"gmail_default">M= axCountEnable =3D 0</div><div class=3D"gmail_default"><br></div><div class= =3D"gmail_default">; Set this to append the user count(s) after the locatio=
n string in the</div><div class=3D"gmail_default">; directory server listin= g.=C2=A0 UserCountEnable and MaxCountEnable above</div><div class=3D"gmail_= default">; control the format.</div><div class=3D"gmail_default">UserCountI= nLocation =3D 0</div><div class=3D"gmail_default"><br></div><div class=3D"g= mail_default">; Set this to the minimum number of milliseconds that station=
s must wait</div><div class=3D"gmail_default">; between transmissions.=C2=
=A0 Any transmissions made during this mandatory pause=C2=A0</div><div clas= s=3D"gmail_default">; interval will be muted.=C2=A0 This parameter may help=
prevent repeater "bouncing"=C2=A0</div><div class=3D"gmail_defau= lt">; that occurs when multiple repeaters or link stations are logged into = a=C2=A0</div><div class=3D"gmail_default">; conference room with poor opera= ting parameters. =C2=A0</div><div class=3D"gmail_default">;</div><div class= =3D"gmail_default">; It will also ensure that there's a break between t= ransmissions to allow=C2=A0</div><div class=3D"gmail_default">; simplex lin=
ks to leave the conference</div><div class=3D"gmail_default">; This variabl=
e may also be set using the pausetime command.</div><div class=3D"gmail_def= ault">;PauseTime =3D 1750</div><div class=3D"gmail_default"><br></div><div = class=3D"gmail_default">; Set this to the minimum number of milliseconds th=
at -L and -R stations</div><div class=3D"gmail_default">; must transmit bef= ore being recognized.=C2=A0 This parameter may help prevent</div><div class= =3D"gmail_default">; repeater "bouncing" that occurs when multipl=
e repeaters or link stations</div><div class=3D"gmail_default">; are logged=
into a conference room with poor operating parameters.</div><div class=3D"= gmail_default">; This variable may also be set using the belchfilter comman= d.</div><div class=3D"gmail_default">;BelchTime =3D 2000</div><div class=3D= "gmail_default"><br></div><div class=3D"gmail_default">; Set this if you ar=
e thebridge with AAC Management LTD's IL-PRO directory</div><div class= =3D"gmail_default">; server.=C2=A0 DO NOT SET this if you are running on th=
e standard EchoLink</div><div class=3D"gmail_default">; directory server.= =C2=A0 Make sure you also set DirServerHost to the IP address</div><div cla= ss=3D"gmail_default">; or host name of your directory server.</div><div cla= ss=3D"gmail_default">;iLinkDirServer =3D 1</div><div class=3D"gmail_default= "><br></div><div class=3D"gmail_default">; Age of DNS cache in seconds befo=
re it is updated.</div><div class=3D"gmail_default">;DnsUpdateInterval =3D = 900</div><div class=3D"gmail_default"><br></div><div class=3D"gmail_default= ">; Set variable to create a private conference.=C2=A0 A private conference=
will</div><div class=3D"gmail_default">; be listed in the directory server=
as "Private conference" and will accept</div><div class=3D"gmail= _default">; connections only from stations which have been added to the acc= ess control</div><div class=3D"gmail_default">; list.</div><div class=3D"gm= ail_default">;PrivateConference =3D 1</div><div class=3D"gmail_default"><br= ></div><div class=3D"gmail_default">; This variable specifies how many seco= nds a user's record remains in memory=C2=A0</div><div class=3D"gmail_de= fault">; after he has logged out of the EchoLink system.</div><div class=3D= "gmail_default">;InactiveDirTimeout =3D 51000</div><div class=3D"gmail_defa= ult"><br></div><div class=3D"gmail_default">; This variable controls how of= ten the log file is rolled over.</div><div class=3D"gmail_default">; 0 - lo= gging disabled. (The Unix version will use syslog for logging)</div><div cl= ass=3D"gmail_default">; 1 - Never: single logfile, filename =3D tbd.log</di= v><div class=3D"gmail_default">; 2 - Never: new logfile opened everyday, fi= lename =3D tbdmmddyy.log</div><div class=3D"gmail_default">; 3 - Daily: new=
logfile opened everyday, filename =3D tbd.log, tbd.bak</div><div class=3D"= gmail_default">; 4 - Weekly: new logfile opened everyday, filename =3D mon.= log, tues.log, ...</div><div class=3D"gmail_default">;</div><div class=3D"g= mail_default">;LogFileRolloverType =3D 1</div><div class=3D"gmail_default">= <br></div><div class=3D"gmail_default">; This variable controls the logging=
detail:</div><div class=3D"gmail_default">; =C2=A0 =C2=A0 =C2=A0 0 - log e= verything</div><div class=3D"gmail_default">; =C2=A0 =C2=A0 =C2=A0 1 - log = warnings and errors only</div><div class=3D"gmail_default">; =C2=A0 =C2=A0 = =C2=A0 2 - log errors only</div><div class=3D"gmail_default">;</div><div cl= ass=3D"gmail_default">; (not implemented currently, everything is logged)</= div><div class=3D"gmail_default">;LogLevel =3D 0</div><div class=3D"gmail_d= efault"><br></div><div class=3D"gmail_default">############################= ###################################################</div><div class=3D"gmai= l_default">; The following variables control file playback</div><div class= =3D"gmail_default">;</div><div class=3D"gmail_default">; These variables co= ntrol the pauses between transmission when playing</div><div class=3D"gmail= _default">; back recordings. Times are specified in seconds.</div><div clas= s=3D"gmail_default">;</div><div class=3D"gmail_default">; The original paus=
es between transmission are unmodified when MaxPlayBackPause=C2=A0</div><di=
v class=3D"gmail_default">; is set to a large value and MaxPlayBackPause is=
set to zero.</div><div class=3D"gmail_default">;</div><div class=3D"gmail_= default">; The purpose of these variables are to allow pauses to either be = compressed</div><div class=3D"gmail_default">; or expanded for playback pur= poses.=C2=A0 For example setting MinPlayBackPause to</div><div class=3D"gma= il_default">; 5000 (5 seconds) will expand pauses between transmission to 5=
seconds to</div><div class=3D"gmail_default">; provide breaks to allow hal=
f duplex repeater links to be dropped during=C2=A0</div><div class=3D"gmail= _default">; playback.</div><div class=3D"gmail_default">;</div><div class= =3D"gmail_default">; On the other hand setting a MaxPlayBackPause allows lo=
ng pauses to be=C2=A0</div><div class=3D"gmail_default">; shortened.</div><= div class=3D"gmail_default">;</div><div class=3D"gmail_default">MaxPlayBack= Pause =3D 5</div><div class=3D"gmail_default">MinPlayBackPause =3D 3</div><= div class=3D"gmail_default"><br></div><div class=3D"gmail_default">; This v= ariable sets a maximum uninterrupted transmission length for file</div><div=
class=3D"gmail_default">; playback.=C2=A0 If a recording exceeds this limi=
t a pause of MinPlayBackPause</div><div class=3D"gmail_default">; seconds i=
s inserted and then the playback resumes.=C2=A0 Time is specified in</div><= div class=3D"gmail_default">; seconds.</div><div class=3D"gmail_default">Ma= xPlayWithoutPause =3D 300</div><div class=3D"gmail_default"><br></div><div = class=3D"gmail_default">; This variable specifies a welcome file to be play=
ed to users when they</div><div class=3D"gmail_default">; connect to thebri= dge.=C2=A0 The specified file MUST be in thebridge's internal=C2=A0</di= v><div class=3D"gmail_default">; format.=C2=A0 You can create a suitable we= lcome file by using thebridge's</div><div class=3D"gmail_default">; .re= cord command or by using the tbdcnv utility (available separately).</div><d=
iv class=3D"gmail_default">;=C2=A0</div><div class=3D"gmail_default">;Welco= meFile =3D welcome.tbd</div><div class=3D"gmail_default"><br></div><div cla= ss=3D"gmail_default">; This variable specifies the number of seconds to wai=
t after the user</div><div class=3D"gmail_default">; connects before the we= lcome message is played.=C2=A0 This provides time</div><div class=3D"gmail_= default">; for any voice announcements from the EchoLink client to complete= .</div><div class=3D"gmail_default">; NOTE: Any activity on the conference = before the welcome file starts playing</div><div class=3D"gmail_default">; = will cancel the welcome message.=C2=A0 This prevents the welcome message fr= om</div><div class=3D"gmail_default">; playing in the middle of a live conv= ersation.</div><div class=3D"gmail_default">;</div><div class=3D"gmail_defa= ult">;WelcomeDelay =3D 0</div><div class=3D"gmail_default"><br></div><div c= lass=3D"gmail_default">; This variable specifies the number of seconds to w= ait after the conference</div><div class=3D"gmail_default">; becomes free b= efore bulletins queued with the .play4 command and using the=C2=A0</div><di=
v class=3D"gmail_default">; -i flag command are played.</div><div class=3D"= gmail_default">;IdleTimeout =3D 0</div><div class=3D"gmail_default">#######= ########################################################################</d= iv><div class=3D"gmail_default"><br></div><div class=3D"gmail_default">; If=
this variable is nonzero thebridge will save the information file=C2=A0</d= iv><div class=3D"gmail_default">; (brag sheet) for connecting stations in f= iles named "<callsign>.info".</div><div class=3D"gmail_defa= ult">;</div><div class=3D"gmail_default">;SaveInfoFiles =3D 0</div><div cla= ss=3D"gmail_default"><br></div><div class=3D"gmail_default">; If this varia= ble is nonzero the users information file (brag sheet)</div><div class=3D"g= mail_default">; will be displayed instead of the usual station list the fir=
st time the</div><div class=3D"gmail_default">; user transmits.</div><div c= lass=3D"gmail_default">;=C2=A0</div><div class=3D"gmail_default">ShowStatio= nInfo =3D 1</div><div class=3D"gmail_default"><br></div><div class=3D"gmail= _default">; Set this variable to the IP address you wish thebridge to bind = to.=C2=A0</div><div class=3D"gmail_default">; If this variable is not set t= hen thebridge will listen to all available=C2=A0</div><div class=3D"gmail_d= efault">; interfaces, this is normally what you want.</div><div class=3D"gm= ail_default">;Bind2IP =3D 1.2.3.4</div><div class=3D"gmail_default"><br></d= iv><div class=3D"gmail_default">###########################################= ####################################</div><div class=3D"gmail_default">; Th=
e following variables maybe be used to enable connectivity to non-Echolink<= /div><div class=3D"gmail_default">; clients such as Speak Freely.=C2=A0 Sin=
ce IRLP is based on Speak Freely this</div><div class=3D"gmail_default">; a= llows suitably configured IRLP nodes to connect to the conference.</div><di=
v class=3D"gmail_default"><br></div><div class=3D"gmail_default">; Set this=
variable to allow connections from Speak Freely or RTP clients.</div><div = class=3D"gmail_default">SF_Enable =3D 1</div><div class=3D"gmail_default"><= br></div><div class=3D"gmail_default">; Set this variable to a password tha=
t to be used by Speak Freely or</div><div class=3D"gmail_default">; RTP cli= ents to gain access to the conference.</div><div class=3D"gmail_default">RT= P_Pass =3D password</div><div class=3D"gmail_default"><br></div><div class= =3D"gmail_default">; Set this variable to specify a non-standard input port=
for RTP and=C2=A0</div><div class=3D"gmail_default">; Speak Freely and RTP=
clients.=C2=A0 This may be useful to allow multiple RTP=C2=A0</div><div cl= ass=3D"gmail_default">; applications to be run on a single host.=C2=A0 Note=
: the RTP spec requires this=C2=A0</div><div class=3D"gmail_default">; to b=
e an even port, the associated control port will be the next (odd) port.</d= iv><div class=3D"gmail_default">SF_Port =3D 2174</div><div class=3D"gmail_d= efault"><br></div><div class=3D"gmail_default">; Set this variable to speci=
fy a non-standard port for RTP responses for=C2=A0</div><div class=3D"gmail= _default">; Speak Freely and RTP clients.=C2=A0</div><div class=3D"gmail_de= fault">SF_ReplyPort =3D 2074</div><div class=3D"gmail_default"><br></div><d=
iv class=3D"gmail_default">; Set this variable to the value to be sent as t=
he user's full name.</div><div class=3D"gmail_default">; If the variabl=
e is not sent then ConferenceCall will be sent instead.</div><div class=3D"= gmail_default">;FullName =3D John Q Ham</div><div class=3D"gmail_default"><= br></div><div class=3D"gmail_default">; Set this variable to the IP address=
you wish thebridge to bind to for</div><div class=3D"gmail_default">; Spea=
k Freely conferences. If this variable is not set then thebridge will=C2=A0= </div><div class=3D"gmail_default">; listen to all available interfaces, th=
is is normally what you want.</div><div class=3D"gmail_default">;SFBind2IP = =3D 5.6.7.8</div><div class=3D"gmail_default"><br></div><div class=3D"gmail= _default">; Set this variable to enable the Speak Freely and RTP conference=
s to support</div><div class=3D"gmail_default">; clients running the ADPCM = codec.=C2=A0 NB: This does *NOT* mean that GSM and=C2=A0</div><div class=3D= "gmail_default">; ADPCM clients will be able to communicate by connecting t=
o a common=C2=A0</div><div class=3D"gmail_default">; conference.=C2=A0 GSM = packets are only relayed to GSM clients and ADPCM packets=C2=A0</div><div c= lass=3D"gmail_default">; are only relayed to ADPCM clients.</div><div class= =3D"gmail_default">;AllowADPCM =3D 1</div><div class=3D"gmail_default"><br>= </div><div class=3D"gmail_default">########################################= #######################################</div><div class=3D"gmail_default"><= br></div><div class=3D"gmail_default">; Set this variable to the number of = seconds after last activity before=C2=A0</div><div class=3D"gmail_default">=
; stations are automatically put into the lurk mode.</div><div class=3D"gma= il_default">;AutoLurkTimeout =3D 900</div><div class=3D"gmail_default"><br>= </div><div class=3D"gmail_default">; Set this variable to automatically put=
stations into the lurk mode after=C2=A0</div><div class=3D"gmail_default">=
; AutoLurkTimeout seconds of inactivity.=C2=A0 By default stations are only=
put</div><div class=3D"gmail_default">; into the lurk mode after a timeout=
if the station specifically requested=C2=A0</div><div class=3D"gmail_defau= lt">; that mode by entering ".lurk".</div><div class=3D"gmail_def= ault">; Bit map: =C2=A0 =C2=A0 =C2=A01 - Autolurk -R stations</div><div cla= ss=3D"gmail_default">; =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 2 -=
Autolurk -L stations</div><div class=3D"gmail_default">; =C2=A0 =C2=A0 =C2= =A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 4 - Autolurk "Normal stations"</d= iv><div class=3D"gmail_default">; =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0=
=C2=A0 8 - Autolurk other conferences</div><div class=3D"gmail_default">; = i.e. Set DefaultAutoLurk to the sum of options you wish to enable,=C2=A0</d= iv><div class=3D"gmail_default">; for example: 0 =3D autolurk disabled, 3 =
=3D autolurk just -L and -R,=C2=A0</div><div class=3D"gmail_default">; 15 =
=3D autolurk everyone.</div><div class=3D"gmail_default">DefaultAutoLurk =
=3D 0</div><div class=3D"gmail_default"><br></div><div class=3D"gmail_defau= lt">; Set this variable to the maximum allowable transmission time.=C2=A0 A=
value</div><div class=3D"gmail_default">; of zero disables the timeout.</d= iv><div class=3D"gmail_default">BlabOffTimer =3D 0</div><div class=3D"gmail= _default"><br></div><div class=3D"gmail_default">; Set this variable to an = alternate application name to be used for logging</div><div class=3D"gmail_= default">; purposes.=C2=A0 This is useful when running multiple copies of t= hebridge on a</div><div class=3D"gmail_default">; single host. (*nix only)<= /div><div class=3D"gmail_default">;AppName =3D tbd1</div><div class=3D"gmai= l_default"><br></div><div class=3D"gmail_default">; Set this variable to an=
alternate directory to use for PID files.=C2=A0 This</div><div class=3D"gm= ail_default">; might be useful when running thebridge without root privileg= es. (*nix only)</div><div class=3D"gmail_default">;RunDir =3D /var/run</div= ><div class=3D"gmail_default"><br></div><div class=3D"gmail_default">; The = following variable is used to execute commands on thebridge startup.</div><= div class=3D"gmail_default">; This may be useful to set initial conditions.= =C2=A0 For example if you always=C2=A0</div><div class=3D"gmail_default">; = want your conference room linked to your club's repeater you might</div= ><div class=3D"gmail_default">; issue a connect command to bring the link u=
p. Unlike most variables=C2=A0</div><div class=3D"gmail_default">; there ca=
n be more than one StartupCmd variable in the configuration file,=C2=A0</di= v><div class=3D"gmail_default">; each one simply executes another command.<= /div><div class=3D"gmail_default">;</div><div class=3D"gmail_default">; NOT=
E: Startup commands are executed approximately 1 minute after the first=C2= =A0</div><div class=3D"gmail_default">; successful login to a directory ser= ver.=C2=A0 This delay is necessary to ensure</div><div class=3D"gmail_defau= lt">; that the conference's IP address has had time to propagate to all=
of</div><div class=3D"gmail_default">; the EchoLink directory servers befo=
re connect commands are issued. =C2=A0</div><div class=3D"gmail_default">; = For security EchoLink nodes refuse connections from other nodes unless they= =C2=A0</div><div class=3D"gmail_default">; are listed in the directory serv= er.</div><div class=3D"gmail_default">;StartupCmd =3D connect W1AW-R</div><= div class=3D"gmail_default"><br></div><div class=3D"gmail_default">########= #######################################################################</di= v><div class=3D"gmail_default">; The following variables maybe be used to e= nable 3rd party or user written</div><div class=3D"gmail_default">; program=
s to interface with thebridge.=C2=A0 See SCRIPTING.txt for more details.</d= iv><div class=3D"gmail_default"><br></div><div class=3D"gmail_default">; Se=
t this variable to enable local scripting using the tbdcmd utility.</div><d=
iv class=3D"gmail_default">CmdPort =3D 5198</div><div class=3D"gmail_defaul= t"><br></div><div class=3D"gmail_default">; Set this variable to enable loc=
al chating the tbdchat utility.</div><div class=3D"gmail_default">ChatPort = =3D 5199</div><div class=3D"gmail_default"><br></div><div class=3D"gmail_de= fault">; Set this variable to point to a script/program to execute when &qu= ot;interesting"</div><div class=3D"gmail_default">; events occur.=C2= =A0</div><div class=3D"gmail_default">EventScript =3D /home/EchoIRLP/script= s/echoirlp-status</div><div class=3D"gmail_default"><br></div><div class=3D= "gmail_default">; Set this variable to point custom help file that will be = displayed when the</div><div class=3D"gmail_default">; user enters the '= ;.help' command.=C2=A0 This may be used to document custom</div><div cl= ass=3D"gmail_default">; commands.=C2=A0 Please be sure to include help for = the built in commands as well.</div><div class=3D"gmail_default">;HelpFile = =3D /home/tbd/mycustomhelp</div><div class=3D"gmail_default"><br></div><div=
class=3D"gmail_default">; Set this variable to create a *nix style host fi=
le of EchoLink users.</div><div class=3D"gmail_default">; The EchoLink node=
number is added after the IP address as a comment.</div><div class=3D"gmai= l_default">WriteHostFile =3D 1</div><div class=3D"gmail_default"><br></div>= <div class=3D"gmail_default">; Set this variable to included all hosts theb= ridge knows about in the hosts</div><div class=3D"gmail_default">; file.=C2= =A0 Normally only hosts that are currently logged in on the Echolink</div><= div class=3D"gmail_default">; directory server are included.=C2=A0 Use this=
feature carefully, the IP address</div><div class=3D"gmail_default">; of h= osts that are not currently logged in may be inaccurate especially</div><di=
v class=3D"gmail_default">; for users with dialup connections.=C2=A0 Hosts = which are not logged in are</div><div class=3D"gmail_default">; marked with=
"(off line)" after the EchoLink node number in the comment field= .</div><div class=3D"gmail_default">;IncludeAllHosts =3D 1</div><div class= =3D"gmail_default"><br></div><div class=3D"gmail_default">; Set this variab=
le to include the node's QTH in the hosts file.</div><div class=3D"gmai= l_default">; NB: As of 6/29/2007 including QTH information in the hosts fil=
e breaks</div><div class=3D"gmail_default">; the EchoIRLP scripts.</div><di=
v class=3D"gmail_default">;QthInHostsFile =3D 1</div><div class=3D"gmail_de= fault"><br></div><div class=3D"gmail_default">; The Qth information (or inf= ormation set by the Info command) can=C2=A0</div><div class=3D"gmail_defaul= t">; be replace with "In Conference <call>" or "Connec= ted to <call>" when=C2=A0</div><div class=3D"gmail_default">; th=
e node is connected.=C2=A0 Set the following variable to zero to enable</di= v><div class=3D"gmail_default">; that feature.</div><div class=3D"gmail_def= ault">; 0 =3D never override ConferenceQth or .info command settings.</div>= <div class=3D"gmail_default">; 1 =3D show connection state for conferences = only.</div><div class=3D"gmail_default">; 2 =3D show connection state for c= onferences and stations.</div><div class=3D"gmail_default">;ShowStatusInInf=
o =3D 0</div><div class=3D"gmail_default"><br></div><div class=3D"gmail_def= ault">#####################################################################= ##########</div><div class=3D"gmail_default"><br></div><div class=3D"gmail_= default">; This variable specifies the maximum number of duplicate text mes= sages</div><div class=3D"gmail_default">; that may be received from a stati=
on before that station is automatically=C2=A0</div><div class=3D"gmail_defa= ult">; disconnected.=C2=A0 Duplicate text messages can be generated when a = number</div><div class=3D"gmail_default">; of conferences are connected tog= ether such that they form a closed loop.</div><div class=3D"gmail_default">=
; There is code in thebridge which attempts to suppress this "feedback= "=C2=A0</div><div class=3D"gmail_default">; but the detection logic is=
less than perfect.=C2=A0 Some versions of thebridge</div><div class=3D"gma= il_default">; are known to be unable to suppress loops of certain topologys= .=C2=A0 The</div><div class=3D"gmail_default">; automatic disconnect logic =
is intended as a safety measure to ensure that</div><div class=3D"gmail_def= ault">; all available bandwidth is not consumed by a text message feedback = loop.</div><div class=3D"gmail_default">; Although not recommended the auto= matic disconnection logic can be=C2=A0</div><div class=3D"gmail_default">; = disabled by setting this variable to zero.</div><div class=3D"gmail_default= ">;MaxDups =3D 100</div><div class=3D"gmail_default"><br></div><div class= =3D"gmail_default">########################################################= #######################</div><div class=3D"gmail_default">; The following v= SEEN-BY: 1/100 128